resealing pebble epoxy chattahoochee deck 603 435-7199

PROGRESSIVE

EPOXY POLYMERS, INC.

Epoxy Pebble stone decks

Reseal and/or Create (PAGE 2)

This is the more detailed PAGE 2

return to Homepage

** EMAIL / ph 603.435.7199 EST / BUY ONLINE **

Member: NACE (National Assoc. of Corrosion Engineers), SSPC (Soc. of Protective Coatings)

"Professionals helping Homeowners, Boat Owners and Professionals since 1994"

THIS SECTION (detailed page two) : Re-seal, create or repair you pebble deck (Chattahoochee / riverstone) deck with Basic No Blush epoxy

Loose stones are a red flag telling you repairs / resealing is past due. Call now to talk repair options, best epoxy products, how to repair / reseal / create. There are lots of inferior products and 'cheating cost cutting contractors' in this market. Get educated before you spend your money.

A COMMERCIAL - INDUSTRIAL - PROFESSIONAL PRODUCT

You won't find this product, or products like it, in a general purpose, mass market, consumer, DIY, box store or flashy marketing company website.

PEBBLE STONE FLOOR-DECK RECOAT TWO PART EPOXY RESIN

Let's talk about your pebble deck (603 - 435 - 7199 or EMAIL)

Pebble stone decks need recoating every 2 - 5 years (sooner if you hired a contractor to do it and they 'cut all sorts of corners' to maximize their profits - the reason why a majority of people reseal their stone decks themselves). If you see loose pebbles and stones you are past the time you should have resealed the deck with new epoxy. You can still repair a few loose stones and reseal everything, but do not delay much longer. Lose enough stones the then entire deck will need to be removed and replaced.

You cannot re-seal in the heat of summer (pot life for the epoxy is too short). You can do repairs and re-glue down loose stones while you are waiting for cooler weather. You use the same epoxy (Basic No Blush (tm)). Purchase a unit of it for repairs and this will give you some experience with the product so that you know what to expect when you order more for the full surface resealing project.

If you really need to reseal in the summer heat, order the Basic No Blush (tm) epoxy with the slow summer curing agent.

Order this product by calling 603-435-7199 anytime or order online using this link: EPOXY NOW

6/2006) "Just finished using your No Blush Epoxy on our stone/pebble pool deck. Used four 1.5 gallon kits for about 800 sq. feet. The rollers you sell for this are the way to go. I used 3 for this job and should have ordered a 4th to be safe. Power mixed 1.5 gallons at a time and used an oversized paint roller an(1 gallon) and a standard size one. With 2 people we were done in 11/2 hours. The weather was overcast and 62 degrees and had not trouble at all. Looks great and hope to get 3 or 4 years out of it here in Ohio. The stone was laid 3 years ago and am interested to see the comparison. Great product."
Kevin D

FOUR YEARS LATER KEVIN DID ANOTHER DIY RECOAT - HERE ARE HIS MOST RECENT COMMENTS

(5/2010) "Wanted to let you know how pleased we are with the No Blush (summer version). Just finished doing our pebble pool deck and it came out great. The summer version gave us more time to roll on the product and not feel rushed. I highly recommend the split rollers. Our deck is around 850 sq. ft. ; we used 4 of the 1.5 gallon kits and 3 of the split rollers The split rollers worked great, just make sure that you keep them wet and don't over roll the stone so that the roller has little to no epoxy on it. It took us around 2 hours including power blowing the deck surface. The temperature was around 75.

Really a simple project if you plan ahead. Used a 3 gallon plastic bucket to mix the batch using a battery powered drill and mixing device attached. Clean-up was easy. We used old plastic bags to take the roller off and dispose of them.

By the way, the quotes to do our deck (825 sq. ft) ranged between $850 to $1200. Also they all were using standard rollers for epoxy and not the foam split rollers you sell. The amount of epoxy used by the contractors to recoat was only 2 to 3 gallons versus the four of the 1.5 gallon kits you sell. People need to be sure if they have it done there is enough epoxy being used by the contractors to settle into the gaps with the stone to get a good sealing.

-- Proof of a happy repeat customer. You won't find that on any other web site's feedback section. What more can we say about our Basic No Blush epoxy to convince you that this is the best product for your pebble deck?

Order this product by calling 603-435-7199 anytime or order online using this link: EPOXY NOW

Order one 1.5 gal Basic No Blush epoxy kit per 200 sf of stone to reseal and optional special split roller for application and optional short nap epoxy rollers - click here for roller info)

If you don't use or FORMULATED, OUTDOOR, MARINE GRADE epoxy (opting for some cheap, no-name clear epoxy) you will probably regret it. Comes in regular, slow summer cure, or fast winter cure.

Special Epoxy Application Roller (optional)

These thick foam rollers are used to apply epoxy to pebble stone deck surfaces. The vert. splits (looks like someone sliced the rollers with a knife) help to keep the epoxy evenly loaded as it is rolled over rough surfaces (such as a layer of pebbles). Nine inches long - standard roller size! No required, but very popular! (under "misc or accessories" in our 2 online stores) - Order Rollers and Basic No Blush epoxy from our Simple Online Store.

USER ROLLER COMMENTS:

"I ordered the No Blush product and some of the recommended split rollers. We waited for a 3-day no rain forecast and even though it was a warm 72-degree morning I had my wife mix small batches while I applied the No Blush without any hardening problems and we finished the job in a couple of hours. The key thing was the split rollers. They hold and apply the epoxy much better than any standard roller. I ordered (4) rollers... "

(5/2010) "Wanted to let you know how pleased we are with the No Blush... I highly recommend the split rollers. Our deck is around 850 sq. ft. ; we used 4 of the 1.5 gallon kits and 3 of the split rollers The split rollers worked great, just make sure that you keep them wet..." (note the 2010 date - we have been doing this for a long time!)

"I am very happy with my recent purchase of the No-Blush Pebble Re-coat product. The split rollers were exceptional." Jack 7/18

Note: as long as you keep fresh epoxy on the roller it will last and not 'harden up" - If you stop or keep too much epoxy for too long on the roller it will harden up very pauloman555@yahoo.comly. --- be sure NOT to order the "short nap epoxy rollers" --- order 1.5 gal kit of Basic No Blush per 200 sf of resealing. Must glue down any loose stones first with same product before resealing. Apply in 'perfect weather" - mornings in the 70s - no rain in sight for several days.